Cleaning · Surface suitability · Customer safety

Cleaning Applications, Surface Limits & Customer Safety Boundaries

Kangerna supplies melamine foam cleaning sponges, composite scouring pads, mop heads, floor pads and transport polishing pads for defined surface-cleaning evaluations. This page explains initial suitability, prohibited uses, wet-use expectations and where the customer’s validation responsibility begins.

Test on a hidden area first No human or pet skin contact Approved sample controls supply
3
Cleaning product families
5
Trial checks before approval
1
Approved sample baseline
No
Human or pet skin-contact use
Product application scope

Three cleaning formats, one evidence rule

Use the lists below as a starting point for a controlled trial, not as a universal compatibility guarantee. Final suitability depends on the surface coating, finish, age, contamination, cleaner, pressure, contact time and cleaning method.

01 · Hand cleaning

Cleaning sponges, composite scouring pads & mop heads

Initial evaluation surfaces

Ceramic, glazed tile, glass, wood flooring, marble, plastics and stainless steel, subject to the specific finish and product grade.

Do not use on

Painted surfaces, automotive paint or human and pet skin. Wood, stone and high-gloss finishes require a hidden-area test before broader use.

02 · Floor cleaning

Melamine foam floor pads

Initial evaluation surfaces

Ceramic tile, glass, marble, plastics and stainless steel under the intended floor-cleaning method. Confirm the pad grade, machine pressure and movement pattern before use.

Do not use on

Rough concrete or asphalt, or on human and pet skin. Do not use on painted, coated or unknown flooring until a hidden-area trial has been approved.

03 · Transport finishing

Transport polishing pads

Initial evaluation surfaces

Defined exterior surfaces on high-speed rail, metro, aircraft and yachts, plus ceramic, glass, marble and stainless steel. The customer must confirm the exact substrate and coating.

Do not use on

Automotive applications or automotive paint, or on human and pet skin. A vehicle category name does not confirm compatibility with every coating, finish or interior surface.

Surface suitability matrix

Check the surface before choosing the pad

“Test first” means the surface may be evaluated under the customer’s intended conditions. It does not mean the product is approved for every finish, cleaner or machine setting.

Surface or use Sponges, scouring pads & mop heads Floor pads Transport polishing pads
Ceramic, glazed tile, glass, marble, plastics and stainless steel Test first Test first Test first
Wood flooring Test first Not cleared Not cleared
Painted surfaces and automotive paint Do not use Do not use Do not use
Rough concrete and asphalt Not cleared Do not use Not cleared
High-speed rail, metro, aircraft and yacht surfaces Not cleared Not cleared Test first
Human or pet skin Do not use Do not use Do not use
Unknown, fragile, aged or high-value coating Hold use Hold use Hold use

Test first: evaluate a hidden area under the intended method.

Do not use: prohibited or outside the product’s intended application.

Not cleared / hold use: no suitability claim has been established; contact Kangerna before proceeding.

When the substrate is uncertain, the trial stops

Do not proceed because an earlier pad worked on a similar-looking surface. Batch, coating, gloss, age and contamination can change the result.

If compatibility is not documented, test a small inconspicuous area with the exact cleaner, pressure and motion intended for production.
Wet use, shedding & scratching

What customers can reasonably evaluate

Kangerna does not state a universal wet-use life, a zero-shedding guarantee for every condition or a no-scratch guarantee for every surface. These outcomes must be assessed against the approved sample and the customer’s cleaning process.

01 / WET USE

Wet-use life depends on the process

Evaluate performance under the intended water quality, cleaner chemistry and dilution, pressure, contact time, cleaning frequency and number of cycles. Set an acceptance limit for foam wear and cleaning performance in the trial.

02 / SHEDDING

Shedding must be checked against the sample

Foam residue can vary with product grade, wetness, pressure, contamination and use duration. Inspect the surface after the first pass and repeated cycles; stop if residue affects the finish, downstream process or acceptance criteria.

03 / SCRATCH RISK

No surface-contact shortcut

Foam, abrasive layers, trapped grit and damaged edges may affect sensitive finishes. Use light pressure, a suitable grade and a clean pad. Never use these products on human or pet skin.

Responsibility boundary

Who owns what, from sample to site

Supply responsibility and application responsibility meet at the approved sample and agreed product specification. A change to the surface, chemistry, machine setting or cleaning method requires a new evaluation.

Supplier scope · Kangerna

Supply to the confirmed reference

  • Supply the agreed product construction, grade, dimensions, color and quantity.
  • Use the approved sample, drawing and contract specification as the supply reference.
  • Provide the available product information relevant to the agreed specification and commercial terms.
  • Review reported consistency questions against the approved sample and affected batch.
Customer scope · Project team

Validate the surface and control use

  • Confirm the substrate, coating, finish, age and contamination before selecting a product.
  • Approve a hidden-area trial using the exact cleaner, dilution, pressure, speed and contact time.
  • Keep all products away from human and pet skin and isolate every prohibited surface.
  • Train operators, inspect results, stop use after any adverse change and manage site safety and disposal.
Supplier handoverApproved sample and aligned product specification
Boundary
Customer decisionSurface trial, operating method and final approval
Five-step validation

Approve the cleaning method, not just the pad

A product can appear suitable in one setting and fail in another because the cleaner, pressure, contamination or coating has changed. Use a controlled sequence and keep the approved method with the approved sample.

Stop ruleStop the trial if you see hazing, color or gloss change, visible scratching, edge lifting, accelerated foam breakdown or residue that affects the next process.
01

Define the surface

Record material, coating, finish, age, condition, contamination and the required visual or functional result.

02

Choose a candidate

Select the product family, grade, construction, size and color for evaluation; do not treat the selection as final approval.

03

Plan the hidden-area test

Use the exact water, cleaner, dilution, pressure, speed, dwell time and motion intended for routine cleaning.

04

Inspect after repeated use

Check gloss, color, scratching, residue, shedding, foam wear and cleaning result. Record photos and the test conditions.

05

Approve or stop

The customer approves the conditions that passed. Repeat the evaluation after any change to chemistry, equipment, surface or product.

Sample review brief

What to send before requesting a cleaning trial

Complete information lets us discuss a relevant sample without implying that one product or grade fits every surface. The customer remains responsible for validating the product under actual use conditions.

Give the trial a measurable basis

Provide the surface and cleaning method together, rather than a product name alone. If some details are not yet known, identify them as open points in the sample review.

  • Surface systemSubstrate, coating, finish, age, condition and area to be cleaned.
  • ContaminationSoil or residue type, current cleaning process and any failed method.
  • ChemistryCleaner type, dilution, water quality, temperature and contact time.
  • Mechanical conditionsManual or machine use, pressure, speed, pad size and movement pattern.
  • Acceptance criteriaCleaning result, gloss or color limits, residue and maximum scratch or foam wear.
  • Commercial detailsProduct construction, size, color, quantity, destination, documents and target schedule.
FAQ

Cleaning surface questions, answered

Five practical answers about surface limits, wet use, shedding and customer validation.

Which surfaces are suitable for Kangerna cleaning products?

Ceramic, glazed tile, glass, wood flooring, marble, plastics and stainless steel are initial evaluation surfaces for the relevant product family. Final suitability depends on the coating, finish, cleaner, pressure and method, so test a hidden area first. Painted surfaces, automotive paint and human or pet skin must not be cleaned with these products.

Can transport polishing pads be used on cars?

No. Transport polishing pads are intended only for defined high-speed rail, metro, aircraft, yacht and hard-surface evaluations, and are not for automotive applications or automotive paint. The customer must confirm the exact vehicle, substrate and coating before any trial.

Does “no shedding” apply under every cleaning condition?

Do not treat “no shedding” as a universal guarantee. Evaluate shedding against the confirmed sample under the intended wetness, pressure, contamination, cleaning cycles and acceptance criteria. Stop if foam residue affects the surface, finish or next process.

How should we evaluate wet-use life?

Test the sample with the exact water quality, cleaner, dilution, pressure, contact time and cleaning frequency you intend to use. Record cleaning performance and foam wear over repeated cycles, then set a customer-approved replacement limit; no universal wet-use life applies across different conditions.

Who decides whether a surface is safe to clean?

The customer or finishing team must approve the surface and method after a hidden-area trial. Kangerna supplies to the confirmed sample and product specification; the customer controls operators, prohibited surfaces, pressure, chemistry and site safety, and must repeat the trial after any process change.

Next step

Validate your cleaning application before scale-up

Send the surface, coating, contaminant, cleaner, pressure, expected cleaning cycles and target acceptance criteria. We will review the relevant product family and the sample information needed for your evaluation.

Request a sample review
Оставить сообщение
Имя
Электронная почта *
Сообщение
Мы используем Печенье для улучшения вашего опыта использования онлайн. Продолжая просмотр этого сайта, мы предполагаем, что вы соглашаетесь с использованием нами Печенье .
Message Us